Main
Menu Help:
Touch one of the 6
hot-keys below to go to other menus. This standard menu bar appears at
the bottom of all screens. Descriptions of the menus are as follows:
Controller Configuration
- This menu allows access to controller function such as security log-ins, PID
tuning, site alarm limits, maintenance menus, and setting controller date/time.
Create/Edit Profile
- This menu is used to define test profile parameters such as set points, step
time, event status etc. these profiles can then
be saved and used to run profiles in auto mode without having to create the
profile each time.
Chamber Utilities -
Used to control such things as chamber lights, air purge, nitrogen purge, etc.
Automatic Mode -
Used to run a pre-defined test profile.
Alarm History -
allows viewing and acknowledging past alarm history.
Manual Mode -
Allows running the chamber in manual mode by defining single set points one at
a time.
For additional help
on running the chamber, refer to the operational manual, or call Chart
Industries 1 - 888 - 877 - 3093.